/>Hi, I'm Vivian B from Indiana. Craig "The Water Guy" Phillips reached out asking if I'd share my real homeowner experience with city tap water and the SoftPro® Elite HE Water Softener for City Water (Industry's Best Softener & Filter Combo) that I bought. Here's exactly how everything unfolded for me. I really hope this breakdown helps with your decision.
The Water Problem That Finally Pushed Me Over the Edge
Did you know that even "treated" city water can wreak absolute havoc on your home?
I certainly didn't realize the extent until it was costing me serious money. Living here in Indiana, https://www.trustpilot.com/review/softprowatersystems.com I'd been dealing with what I thought were just normal homeowner annoyances for years. The white crusty buildup on my faucets and showerheads was getting impossible to scrub off, even with heavy-duty cleaners. My coffee maker died twice in eighteen months – and these weren't cheap units.
But the breaking point came last spring when my plumber showed me the inside of my water heater during routine maintenance. The calcium deposits were so thick, he said I'd lost probably 40% efficiency and was looking at early replacement.
That's when I realized this wasn't just about annoying soap scum – this was about protecting a significant investment in my home's infrastructure.
My city water tested at 18 grains per gallon hardness, which apparently puts it in the "very hard" category. Add to that the chlorine taste and occasional metallic aftertaste, plus the way my skin felt tight and itchy after showers, and I knew I needed a real solution. The bottled water costs were adding up too – we were going through 4-5 cases per week just for drinking and cooking.
Why I Chose the SoftPro Elite HE Over Everything Else
>I spent about three weeks researching water treatment options, and honestly, the choices were overwhelming. Salt-based softeners, salt-free conditioners, reverse osmosis systems, basic carbon filters – everyone claimed to be the best solution.
What caught my attention about the SoftPro Elite HE was that it tackles multiple problems in one system. It's not just a water softener – it combines ion exchange resin for hardness removal with activated carbon filtration for chlorine, taste, and odor issues.
This meant I wouldn't need separate systems for different problems.
The high-efficiency rating was crucial for me too. With environmental concerns and rising utility costs, I wanted something that wouldn't waste massive amounts of water during regeneration cycles. The SoftPro Valve technology they use is designed to minimize water and salt consumption while maintaining consistent performance.
I also appreciated that it's specifically designed for city water applications. Many systems seem to be one-size-fits-all, but city water has different challenges than well water – mainly chlorine and chemical treatments rather than iron and bacteria issues.
Unboxing and First Impressions: Better Than Expected
The system arrived in excellent condition, packaged much better than I anticipated. The main tank is substantial – definitely feels like quality construction with a thick fiberglass exterior and professional-grade fittings. Everything was included: bypass valve, installation hardware, even the salt for initial startup.
The control head uses the SoftPro Valve system, which looks much more sophisticated than the basic timers I'd seen on some other units. The digital display is clear and the programming seems straightforward, though I admit I was nervous about the installation complexity.
Documentation was thorough – both a quick-start guide and detailed technical manual. I particularly appreciated the section on calculating proper settings based on your specific water conditions and household size.
Installation Reality: Challenging But Manageable
> I'll be honest – this isn't a simple afternoon project if you're doing it yourself. The unit weighs about 180 pounds when loaded with resin, so you definitely need help moving it into position.
I ended up hiring a local plumber for the actual water line connections, but I handled the electrical (just a standard 120V outlet) and initial programming myself.
The installation required installing the bypass valve assembly into my main water line, which meant shutting off water to the house for about 3 hours. My plumber appreciated that all the fittings were standard sizes – no special adapters needed for my existing 1-inch copper lines.
Initial startup was straightforward following the manual. The system automatically ran its first regeneration cycle, which took about 90 minutes. I was impressed that it monitored the process and adjusted timing based on actual conditions rather than just running a fixed program.
Real-World Performance: Six Months of Honest Results
> The difference was noticeable within 48 hours. That harsh, chlorine smell disappeared immediately, and the water actually tasted clean for the first time in years.
But the mineral-related improvements took a few days to become obvious.
I tested hardness levels with strips before and after installation. Pre-treatment: 18 grains per gallon. Post-treatment: consistently under 1 grain per gallon. The activated carbon filtration reduced chlorine from 2.1 ppm to virtually undetectable levels.
What surprised me most was the cumulative effect over time. My soap and shampoo suddenly worked better – I was using probably half as much and getting better lather.
Dishes came out of the dishwasher actually clean instead of covered in spots. My shower doors stopped accumulating that impossible-to-remove film.
The efficiency claims proved accurate too. The system regenerates roughly every 8-10 days based on actual water usage, consuming about 40 pounds of salt per cycle. Compared to my neighbor's older softener that regenerates every 3 days regardless of usage, the water savings are substantial.
